LSTractor XU Series
Coolant capacity & service interval
LSTractor XU Series coolant capacity ranges from 7 to 9,4 liters. Service intervals include checking every 10 hours and changing every 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| XU5055 (2013- ) |
|
| XU5065 (2013- ) |
|
| XU6158 (2013- ) |
|
| XU6163 (2013- ) |
|
| XU6168 (2013- ) |
|
Additional Notes
- The LSTractor XU Series cooling system capacities fall into two distinct groups: the XU5055 and XU5065 each hold 7 liters, while the XU6158, XU6163, and XU6168 each hold 9.4 liters.
- The 9.4-liter capacity of the XU6158, XU6163, and XU6168 reflects the larger engine displacement in the XU61 sub-series, which requires a greater volume of coolant to maintain operating temperatures across a bigger cooling circuit.
- All five configurations share an identical coolant check interval of every 10 hours of operation, a frequency consistent with early-hour monitoring practices on utility tractors used in variable field conditions.
- The 24-month coolant change interval applies uniformly across all XU Series configurations listed, meaning the replacement schedule is time-based rather than tied to accumulated operating hours.
- A time-based change interval of 24 months is typical for modern extended-life coolant formulations, where chemical degradation occurs over calendar time regardless of how frequently the machine is operated.
- All specifications are designated for normal use conditions, meaning the 10-hour check and 24-month change intervals are not adjusted for severe operating environments in the data provided.
- The XU5055 and XU5065 share an identical 7-liter capacity despite being distinct model designations, indicating the two variants use the same cooling system architecture.