Lamborghini 600/700

Differential fluid capacity & service interval

Lamborghini 600/700 differential fluid capacity ranges from 3,5 liters to 6 liters. Service intervals include a check at 150 hours and a change at 1200 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 660-F Plus (1994-2001)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 150 hours
  • Change 1200 hours
  • Code: (4x4)
  • 775-F Plus (1994-2001)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 150 hours
  • Change 1200 hours
  • Code: (4x4)
  • 600 (1988-1992)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 150 hours
  • Change 1200 hours
  • Code: (4x4)
  • 660-F (1988-1992)
  • Front
  • Use: Normal
  • Capacity 3,5 liter
  • Check 150 hours
  • Change 1200 hours
  • Code: (4x4)
  • 700 (1988-1992)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 150 hours
  • Change 1200 hours
  • Code: (4x4)
  • 775-F (1988-1992)
  • Front
  • Use: Normal
  • Capacity 3,5 liter
  • Check 150 hours
  • Change 1200 hours
  • Code: (4x4)

Additional Notes

  • Front differential fluid capacity across the Lamborghini 600/700 series splits into two distinct values: 6 liters and 3.5 liters. The 3.5-liter figure applies to the 660-F and 775-F models from 1988-1992, while the 600, 700, 660-F Plus, and 775-F Plus all carry the larger 6-liter capacity.
  • The shift from 3.5 liters to 6 liters between the 660-F (1988-1992) and the 660-F Plus (1994-2001) reflects a meaningful difference in front differential housing size between those two generations of the same model line.
  • The same capacity relationship applies to the 775 series: the 775-F holds 3.5 liters of front differential fluid, while the 775-F Plus carries the full 6-liter specification.
  • All six configurations share an identical service interval structure: a fluid level check at every 150 hours of operation and a full fluid change at every 1,200 hours. Intervals expressed in operating hours are standard for agricultural and industrial equipment, where annual mileage is not a reliable measure of mechanical wear.
  • The 1,200-hour change interval represents eight full check cycles, since each 150-hour check falls evenly into the longer drain period. Fluid condition can be monitored progressively across those intervals before a full change is due.
  • All specifications are listed under normal use conditions, meaning the 150-hour check and 1,200-hour change intervals apply to standard operating environments without adjustment for severe-duty factors such as extreme loads or prolonged high-stress field conditions.
  • The 700 model from 1988-1992 carries the same 6-liter front differential capacity and identical service intervals as the 600 from the same period, indicating a shared or equivalent front differential assembly between those two configurations despite the difference in model designation.

Other Systems