LSTractor XP Series
Coolant capacity & service interval
LSTractor XP Series coolant capacity is 12 liters. Service intervals include checking at 10 hours and changing at 3000 hours. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| XP8084 (2019- ) |
|
| XP8094 (2019- ) |
|
| XP8101 (2019- ) |
|
Additional Notes
- The LSTractor XP Series cooling system capacity across the XP8084, XP8094, and XP8101 is 12 liters, which represents a full system fill volume rather than a partial service quantity.
- All three XP Series configurations share an identical check interval of every 10 hours of operation, placing coolant level verification among the most frequent routine inspections in the service schedule.
- The change interval for the cooling system is set at 3,000 hours across the XP8084, XP8094, and XP8101, a figure consistent with extended-life coolant formulations used in modern agricultural equipment.
- All three configurations carry a normal use condition designation, meaning the 3,000-hour change interval applies under standard operating circumstances rather than elevated-stress or severe-duty conditions.
- The XP8084, XP8094, and XP8101 share identical capacity, check, and change specifications, indicating a common cooling system architecture across the three models despite their differing model designations.