LSTractor XP Series

Brake fluid capacity & service interval

LSTractor XP Series uses brake fluid with a capacity of 0,5 liter. Service intervals require a check every 300 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XP8084 (2019- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 300 hours
XP8094 (2019- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 300 hours
XP8101 (2019- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 300 hours

Additional Notes

  • The LSTractor XP Series brake fluid specifications cover the hydraulic brake/clutch system, which is a combined circuit where a single fluid reservoir serves both the braking and clutch actuation functions.
  • All three XP Series models — the XP8084, XP8094, and XP8101 — share an identical brake/clutch system fluid capacity of 0.5 liter, indicating a relatively compact reservoir consistent with integrated hydraulic systems on tractors in this class.
  • The 0.5 liter figure represents a service fill capacity, meaning the volume expected during a fluid check or top-up under normal operating conditions rather than a full system overhaul drain-and-fill.
  • The specified check interval for all three models is 300 hours of operation under normal use conditions, which is a time-in-service measurement standard in agricultural equipment maintenance rather than a calendar-based schedule.
  • A 300-hour check interval for brake fluid is notably longer than the annual or mileage-based intervals common in automotive applications, reflecting the lower thermal cycling demands typical of tractor hydraulic brake systems compared to road vehicle disc brake circuits.
  • The XP8084, XP8094, and XP8101 share identical capacity and interval values across all listed specifications, suggesting a common hydraulic brake/clutch system architecture across the XP8000-range models introduced from 2019 onward.

Other Systems