LSTractor P series

Coolant capacity & service interval

LSTractor P series uses coolant with a capacity of 10,5 liters. Service intervals include checks every 10 hours and changes every 1200 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
P7010/CPS (2009- )
  • Use: Normal
  • Capacity 10,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
P7020/CPS (2009- )
  • Use: Normal
  • Capacity 10,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
P7030/CPS (2009- )
  • Use: Normal
  • Capacity 10,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
P7040/CPS (2009- )
  • Use: Normal
  • Capacity 10,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The LSTractor P series CPS variants — P7010, P7020, P7030, and P7040 — all share an identical cooling system capacity of 10.5 liters, indicating a uniform engine cooling architecture across the four models introduced from 2009.
  • A 10.5-liter coolant capacity is a relatively substantial fill volume for a tractor cooling system, consistent with the demands of higher-output agricultural engines that generate significant heat under sustained load conditions.
  • The cooling system check interval is set at 10 hours of operation, which is among the most frequent service check points typically seen in tractor maintenance schedules, reflecting the importance of early detection of coolant level loss or contamination during initial and ongoing use.
  • The coolant change interval is specified at 1,200 hours or 24 months under normal use conditions, meaning whichever threshold is reached first would govern when a full coolant replacement is due.
  • The 24-month calendar limit on coolant changes means that even a machine with low annual operating hours would still require a coolant change within two years, as coolant additives and corrosion inhibitors degrade over time regardless of engine runtime.
  • All four P series CPS configurations carry identical check and change intervals alongside the same 10.5-liter capacity, indicating no differentiation in cooling system service requirements across the P7010, P7020, P7030, and P7040 variants.

Other Systems