LSTractor P series

Brake fluid capacity & service interval

LSTractor P series uses brake fluid with a capacity of 0,5 liter. Service intervals require a check every 300 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
P7010/CPS (2009- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 300 hours
P7020/CPS (2009- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 300 hours
P7030/CPS (2009- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 300 hours
P7040/CPS (2009- )
  • Use: Normal
  • Capacity 0,5 liter
  • Check 300 hours

Additional Notes

  • The LSTractor P series covers four CPS variants — P7010, P7020, P7030, and P7040 — each sharing an identical brake fluid capacity of 0.5 liter for the hydraulic brake/clutch system.
  • A 0.5-liter capacity is a relatively modest fill volume, consistent with a combined hydraulic brake and clutch circuit rather than a large standalone brake reservoir.
  • The fluid check interval is set at 300 hours across all four variants under normal use conditions, meaning the interval applies to standard operating environments rather than demanding or high-stress duty cycles.
  • The specification designates a check interval rather than a full fluid replacement interval, indicating the service action at 300 hours is an inspection of fluid level and condition rather than a mandatory drain-and-refill.
  • All four P series CPS variants carry identical capacity and interval figures, reflecting a shared hydraulic brake/clutch system architecture across the P7010, P7020, P7030, and P7040 models introduced from 2009.

Other Systems