LSTractor MT5 Series
Brake fluid capacity & service interval
The LSTractor MT5 Series uses brake fluid with a capacity of 0.5 liter. The data covers three configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MT5.63 (2019- ) |
|
| MT5.68 (2019- ) |
|
| MT5.73 (2019- ) |
|
Additional Notes
- The LSTractor MT5 Series covers three engine variants in the brake fluid specifications: the MT5.63, MT5.68, and MT5.73, all introduced in 2019.
- Each of the three variants carries an identical hydraulic brake system capacity of 0.5 liter, indicating a compact and uniform fluid volume across the MT5 Series lineup.
- A 0.5 liter capacity is characteristic of a service fill figure, representing the amount of fluid held within the hydraulic brake circuit during normal operation rather than a larger overhaul or flush volume.
- All three variants share the same use condition classification of normal, which ties directly to the 0.5 liter capacity value listed for each hydraulic brake system.
- The absence of variation in brake fluid capacity across the MT5.63, MT5.68, and MT5.73 suggests a shared hydraulic brake architecture despite the differing engine designations within the series.