Lindner Lintrac

Power steering fluid capacity & service interval

Lindner Lintrac power steering fluid capacity is 17 liters. Service intervals include checking at 500 hours and changing at 1000 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Lintrac 90 DPF 2WS (2015- )
  • System, power steering
  • Use: Normal
  • Capacity 17 liter
  • Check 500 hours
  • Change 1000 hours
  • Lintrac 90 DPF 4WS (2015- )
  • System, power steering
  • Use: Normal
  • Capacity 17 liter
  • Check 500 hours
  • Change 1000 hours

Additional Notes

  • The Lindner Lintrac 90 DPF shares a hydraulic system with the power steering circuit, meaning the 17-liter capacity figure covers both functions within a single integrated fluid reservoir rather than a dedicated standalone power steering unit.
  • Both the 2WS and 4WS variants of the Lintrac 90 DPF, introduced from 2015, carry an identical 17-liter capacity for the combined hydraulic and power steering system.
  • A fluid check interval of 500 hours applies to both configurations under normal use conditions, placing routine inspection at the halfway point between full change intervals.
  • The change interval is set at 1000 hours for both the 2WS and 4WS variants under normal use conditions, a figure consistent with agricultural equipment operating on engine or PTO hour meters rather than distance-based schedules.
  • The 4WS configuration, which adds rear-wheel steering functionality, draws on the same 17-liter hydraulic fluid volume as the 2WS variant, indicating the additional steering circuit is served within the same shared system capacity.

Other Systems