Lindner Lintrac

Brake fluid capacity & service interval

Lindner Lintrac uses brake fluid with a capacity of 1,5 liters. Service intervals include checks every 250 hours and changes every 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Lintrac 90 DPF 2WS (2015- )
  • Use: Normal
  • Capacity 1,5 liter
  • Check 250 hours
  • Change 24 months
Lintrac 90 DPF 4WS (2015- )
  • Use: Normal
  • Capacity 1,5 liter
  • Check 250 hours
  • Change 24 months

Additional Notes

  • The Lindner Lintrac 90 DPF, in both the 2WS and 4WS configurations introduced in 2015, carries a brake fluid capacity of 1.5 liters within a shared hydraulic brake and clutch system.
  • A 1.5-liter capacity in a combined hydraulic brake and clutch circuit is characteristic of integrated tractor systems, where a single fluid reservoir serves both functions rather than maintaining separate dedicated reservoirs.
  • Under normal use conditions, the specified check interval for the hydraulic brake and clutch system is every 250 hours of operation across both the 2WS and 4WS variants.
  • The change interval is defined by calendar time rather than operating hours alone, with a 24-month replacement cycle applying to both configurations under normal use conditions.
  • The 2WS and 4WS variants of the Lintrac 90 DPF share identical brake fluid capacity and service interval specifications, indicating no differentiation in hydraulic brake and clutch system requirements between the two steering configurations.

Other Systems