Laverda LX

Coolant capacity & service interval

Laverda LX coolant capacity ranges from 35 to 45 liters. Service intervals include a 10 hour check and a 24 month change. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
1950 LX (2000- )
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 24 months
2050 LX (2000- )
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 24 months
2350 LX (2000- )
  • Use: Normal
  • Capacity 40 liter
  • Check 10 hours
  • Change 24 months
2350 LX/LS (2000- )
  • Use: Normal
  • Capacity 40 liter
  • Check 10 hours
  • Change 24 months
2560 LX (2000- )
  • Use: Normal
  • Capacity 45 liter
  • Check 10 hours
  • Change 24 months
2760 LX (2000- )
  • Use: Normal
  • Capacity 45 liter
  • Check 10 hours
  • Change 24 months
2760 LX/LS (2000- )
  • Use: Normal
  • Capacity 45 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • Across all Laverda LX configurations, coolant capacity scales with engine displacement. The 1950 LX and 2050 LX share a 35-liter cooling system capacity, the 2350 LX and 2350 LX/LS hold 40 liters, and the 2560 LX, 2760 LX, and 2760 LX/LS each hold 45 liters.
  • The 35-liter capacity on the 1950 LX and 2050 LX represents a full cooling system service fill, meaning the figure accounts for the total volume of coolant the system holds when properly filled after a drain and refill service.
  • The 40-liter capacity on the 2350 LX and 2350 LX/LS reflects the larger cooling demand of the higher-displacement engine, requiring a proportionally greater volume of coolant to maintain operating temperatures.
  • At 45 liters, the 2560 LX and 2760 LX share the largest cooling system capacity in the LX range. Despite the difference in displacement between the two engines, both require the same total coolant volume.
  • The 2760 LX/LS carries the same 45-liter capacity as the standard 2760 LX, indicating that the LS variant does not alter the fundamental cooling system volume relative to the base configuration.
  • All LX configurations share a uniform coolant check interval of 10 hours of operation under normal use conditions. In equipment with hour meters, this interval ties directly to logged machine hours rather than calendar time.
  • The coolant change interval across all LX configurations is 24 months under normal use conditions. A time-based interval of this kind applies regardless of how many operating hours have accumulated, meaning the calendar period governs the change schedule.
  • The 2350 LX/LS and 2760 LX/LS variants carry identical capacity and interval specifications to their non-LS counterparts. The LS designation does not introduce any variation in cooling system service requirements.

Other Systems