Laverda LX

Brake fluid capacity & service interval

Laverda LX requires brake fluid with a capacity of 0,3 liter. Service intervals include checking every 75 hours and changing every 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
1950 LX (2000- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 75 hours
  • Change 24 months
2050 LX (2000- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 75 hours
  • Change 24 months
2350 LX (2000- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 75 hours
  • Change 24 months
2350 LX/LS (2000- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 75 hours
  • Change 24 months
2560 LX (2000- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 75 hours
  • Change 24 months
2760 LX (2000- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 75 hours
  • Change 24 months
2760 LX/LS (2000- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 75 hours
  • Change 24 months

Additional Notes

  • Across all Laverda LX configurations listed — spanning the 1950 LX, 2050 LX, 2350 LX, 2350 LX/LS, 2560 LX, 2760 LX, and 2760 LX/LS — the hydraulic brake system capacity is uniformly specified at 0.3 liter. A capacity at this scale is typical of a compact hydraulic circuit serving agricultural or light machinery braking rather than a large automotive system.
  • The 0.3 liter figure represents a service fill capacity for the hydraulic brake system. Service fill values reflect the fluid volume needed to maintain or refill an operational system, as opposed to a larger overhaul or dry-fill volume that would account for bleeding losses and empty circuit priming.
  • A check interval of 75 hours applies uniformly under normal use conditions across all listed LX variants. Hour-based intervals are standard in agricultural and off-highway equipment, where annual mileage is an unreliable measure of actual machine use and operating hours provide a more consistent maintenance reference.
  • The change interval is set at 24 months for all listed configurations under normal use conditions. A time-based change interval for brake fluid reflects the hygroscopic nature of conventional brake fluids, which absorb moisture from the atmosphere over time regardless of operating hours, gradually lowering the fluid's boiling point.
  • The 2350 LX/LS and 2760 LX/LS variants share identical brake fluid specifications with their non-LS counterparts. The LX and LX/LS designations indicate trim or configuration differences, yet the hydraulic brake system capacity, check interval, and change interval remain the same at 0.3 liter, 75 hours, and 24 months respectively.
  • All seven configurations carry a starting year of 2000, and all specifications apply under normal use conditions. No separate severe-use intervals are listed for any LX variant, meaning the 75-hour check and 24-month change intervals represent the sole defined service schedule for the hydraulic brake system across the entire LX range.

Other Systems