Landini Vision

Brake fluid capacity & service interval

Landini Vision uses brake fluid with a capacity range of 0,5 to 1 liter. Service intervals include a check every 50 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Vision 100 (2004-2010)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
Vision 105 (2004-2010)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Vision 80 (2004-2010)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
Vision 85 (2004-2010)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Vision 90 (2004-2010)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
Vision 95 (2004-2010)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • The Landini Vision brake fluid specifications cover six variants across the 2004-2010 model years, all sharing a hydraulic brake system configuration and a 50-hour check interval under normal use conditions.
  • A 50-hour service interval is standard practice for agricultural machinery, where operating hours rather than calendar time or distance serve as the primary measure of wear and fluid degradation.
  • The Vision 80, Vision 90, and Vision 100 each carry a 0.5-liter brake fluid capacity, placing them in the lower capacity group within the range.
  • The Vision 85, Vision 95, and Vision 105 each carry a 1-liter brake fluid capacity, double that of the lower-capacity variants, reflecting a larger hydraulic brake circuit volume in those configurations.
  • The split in brake fluid capacity between variants does not follow a simple ascending pattern by model number alone. The Vision 80 and Vision 90 share the same 0.5-liter figure as the Vision 100, while the Vision 85 and Vision 95 share the 1-liter figure with the Vision 105, indicating the capacity difference is tied to specific model configurations rather than power output ranking.
  • In hydraulic brake systems on tractors, the fluid reservoir capacity reflects the volume required to maintain adequate pressure across the braking circuit, including any wet disc brake assemblies that are common in agricultural equipment of this class.
  • The 50-hour check interval applies uniformly across all six variants under normal use conditions, meaning no variant in the range carries a shortened or extended inspection schedule relative to the others.

Other Systems