Landini Super Series

Coolant capacity & service interval

Landini Super Series coolant capacity is 17,5 liters. Service intervals occur every 2000 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
100, Perkins 1104D-44TA (T3) (2017- )
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
100B, Perkins 1104A-44T (T0) (2017- )
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
110, Perkins 1104D-44TA (T3) (2017- )
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
110B, Perkins 1104A-44T (T0) (2017- )
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
90, Perkins 1104D-44 (T3) (2017- )
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
90B, Perkins 1104A-44 (T0) (2017- )
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
7860, Perkins 1104A-44 (T0) (1988-2000)
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
7865, Perkins 1104C-44 (T2) (1988-2000)
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
8860, Perkins 1104A-44 (T0) (1988-2000)
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months
8865, Perkins 1104C-44 (T2) (1988-2000)
  • Use: Normal
  • Capacity 17,5 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • Every configuration listed across the Landini Super Series carries an identical cooling system capacity of 17.5 liters, a figure consistent with a full cooling system service fill on a mid-range four-cylinder agricultural tractor engine.
  • The 2000-hour or 24-month coolant change interval applies under normal use conditions across all listed models, meaning whichever threshold arrives first governs the service event.
  • The 1988-2000 models — the 7860, 7865, 8860, and 8865 — pair the same 17.5-liter capacity with the same 2000-hour/24-month interval as the later configurations, indicating no change in cooling system volume across that generational span.
  • Two distinct Perkins engine families appear within the 1988-2000 group: the naturally aspirated 1104A-44 (Tier 0) in the 7860 and 8860, and the 1104C-44 (Tier 2) in the 7865 and 8865. Despite the difference in emissions tier and engine specification, both share the 17.5-liter cooling system capacity.
  • The 2017 models split each power rating into two variants — a Tier 3 engine and a Tier 0 engine. The 90 uses the Perkins 1104D-44 (T3) while the 90B uses the 1104A-44 (T0), yet both carry the same 17.5-liter cooling system fill.
  • The same Tier 3 and Tier 0 pairing seen in the 90/90B is repeated in the 100/100B and 110/110B configurations, where the Perkins 1104D-44TA (T3) and 1104A-44T (T0) respectively share the 17.5-liter capacity and 2000-hour/24-month service interval.
  • The Perkins 1104D-44TA used in the Tier 3 variants of the 100 and 110 is a turbocharged and aftercooled engine, a design that places greater thermal demands on the cooling circuit than a naturally aspirated unit, making the cooling system capacity a particularly relevant specification for those configurations.

Other Systems