Landini Trekker

Coolant capacity & service interval

Landini Trekker coolant capacity is 15 liters. Service intervals include checking every 10 hours and changing every 1000 hours or 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Trekker 105, C/CF/CF-M (2007-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Trekker 75, C/CF/CF-M (2007-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Trekker 85, C/CF/CF-M (2007-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Trekker 95, C/CF/CF-M (2007-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Trekker 100, C/CF/CFL (2004-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Trekker 70, C/CF/CFL (2004-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Trekker 80, C/CF/CFL (2004-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Trekker 90, C/CF/CFL (2004-2010)
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Landini Trekker cooling system capacity is 15 liters across all listed variants, spanning the 70, 75, 80, 85, 90, 95, 100, and 105 model designations. A 15-liter figure is consistent with a mid-range agricultural tractor cooling circuit, accounting for the radiator, engine block passages, and hose volume combined.
  • Two distinct variant groupings appear within the 2004-2010 production span. The C/CF/CFL body configurations cover the 70, 80, 90, and 100 models from 2004-2010, while the C/CF/CF-M configurations cover the 75, 85, 95, and 105 models from 2007-2010. Despite the different suffix designations and staggered introduction years, the cooling system capacity and service intervals are identical across both groups.
  • The coolant check interval is set at 10 hours of operation under normal use conditions. In agricultural equipment, a 10-hour check interval reflects the high thermal and mechanical demands placed on tractor cooling systems during field work, where early detection of coolant loss can prevent overheating damage.
  • The coolant change interval is specified at 1000 hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format, combining an operational hour threshold with a calendar limit, accounts for tractors that may accumulate hours slowly but still experience coolant degradation over time due to chemical breakdown and contamination.
  • The 1000-hour service interval for coolant changes is a relatively standard benchmark in agricultural machinery. At typical seasonal usage rates, 1000 hours can represent multiple years of field operation, making the 12-month calendar limit the more frequently reached trigger for lower-utilization machines.