Landini Rex
Coolant capacity & service interval
Landini Rex coolant capacity ranges from 10,5 to 15,5 liters. Service intervals require changes every 1000 hours or 12 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Rex 100 GT (2000-2004) |
|
| Rex 60 F/L (2000-2004) |
|
| Rex 70 F/L/GT (2000-2004) |
|
| Rex 80 F/L/GT (2000-2004) |
|
| Rex 90 F/GT (2000-2004) |
|
Additional Notes
- The Landini Rex 60 F/L cooling system holds 10.5 liters, which is the smallest capacity across all Rex variants in the 2000-2004 range covered by these specifications.
- The Rex 70 F/L/GT, Rex 80 F/L/GT, Rex 90 F/GT, and Rex 100 GT all share a cooling system capacity of 15.5 liters, indicating a common cooling architecture across the mid-to-upper tier variants despite differences in engine output.
- The 5-liter difference between the Rex 60 F/L and the remaining variants reflects a meaningfully smaller cooling circuit, which typically corresponds to a physically smaller engine block and reduced heat rejection requirements.
- All five variants specify a coolant change interval of 1,000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time alone can mandate a change even when the hour threshold has not been reached.
- The Rex 70 is available in F, L, and GT body or transmission configurations, yet all three share the same 15.5-liter cooling system capacity, suggesting the cooling circuit is not altered between those variants.
- A 15.5-liter cooling system capacity is relatively substantial for agricultural tractors of this era, reflecting the thermal demands placed on engines operating under sustained load conditions typical of field work.