Landini Rex F
Brake fluid capacity & service interval
The Landini Rex F uses brake fluid with a capacity of 1 liter. The data covers 5 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Rex 100 F/GE/GT (2018- ) |
|
| Rex 110 F/GE/GT (2018- ) |
|
| Rex 120 F/GE/GT (2018- ) |
|
| Rex 80 F/GE/GT (2018- ) |
|
| Rex 90 F/GE/GT (2018- ) |
|
Additional Notes
- The Landini Rex F hydraulic brake system capacity is rated at 1 liter across all five variants covered in the specifications: the Rex 80, Rex 90, Rex 100, Rex 110, and Rex 120, each available in F, GE, and GT configurations.
- A 1-liter brake fluid capacity is a relatively modest figure, consistent with the compact hydraulic brake circuits found in utility tractors of the Rex F class, where the system is designed for efficiency rather than high-volume fluid displacement.
- All five variants share an identical 1-liter capacity figure, meaning no differentiation exists between the lower-displacement Rex 80 and the higher-output Rex 120 in terms of brake fluid volume.
- Each row in the specifications designates normal as the use condition tied to the 1-liter capacity, indicating the figure applies to standard operating circumstances rather than a severe-duty or first-change scenario.
- The hydraulic brake system note applies uniformly across all Rex F variants listed, confirming that the 1-liter capacity figure refers specifically to the hydraulic circuit rather than a dry or mechanical braking arrangement.
- All configurations covered in the specifications carry a starting model year of 2018, meaning the 1-liter brake fluid capacity has been the stated figure for the Rex F hydraulic brake system since at least that year.