Landini Legend NG

Coolant capacity & service interval

Landini Legend NG coolant capacity ranges from 25 to 27 liters. Service intervals include checking every 10 hours and changing every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Legend NG 115 (2002-2006)
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Legend NG 120 (2002-2006)
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Legend NG 130 (2002-2006)
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Legend NG 140 (2002-2006)
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Legend NG 160 (2002-2006)
  • Use: Normal
  • Capacity 27 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Legend NG 180 (2002-2006)
  • Use: Normal
  • Capacity 27 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • Across the Landini Legend NG range from 2002-2006, cooling system capacity falls into two distinct groups: the 115, 120, 130, and 140 models each hold 25 liters, while the higher-output 160 and 180 models require 27 liters.
  • The 2-liter difference in coolant capacity between the lower and upper model variants reflects the larger engine displacement found in the 160 and 180, which generates more heat and demands a greater volume of coolant to maintain operating temperatures.
  • All six variants across the 2002-2006 production span share an identical check interval of every 10 hours of operation under normal use conditions, making frequent visual inspection a standard part of routine tractor maintenance at this service tier.
  • The change interval for all Legend NG cooling systems is specified at 1000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time alone can mandate a coolant change even when the hour threshold has not been reached.
  • A 1000-hour change interval is relatively long for agricultural equipment coolant service, reflecting the use of modern extended-life or pre-mixed coolant formulations that maintain corrosion inhibitor effectiveness over extended periods.
  • The uniform change interval of 1000 hours or 12 months applies equally to both the 25-liter and 27-liter capacity variants, meaning the larger cooling system in the 160 and 180 models does not carry a more frequent service requirement despite holding a greater fluid volume.

Other Systems