Landini Legend
Differential fluid capacity & service interval
Landini Legend differential fluid capacity ranges from 2,2 to 11 liters. Service intervals include checks at 100 hours and changes at 1000 hours or 12 months. The data covers 7 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Landini Legend 105 front differential carries two listed capacity values, 8 liters and 10 liters, which reflects a variation between axle configurations or build specifications within the same model designation rather than a single fixed fill volume.
- A third front differential entry for the Legend 105 covers the suspension-equipped variant, where capacity drops to 2.2 liters, a figure consistent with a supplementary or auxiliary differential housing rather than a full axle assembly.
- The Legend 115 front differential is specified at 10 liters, aligning with the higher of the two Legend 105 values and suggesting a shared or closely related axle design between those two variants.
- Front differential capacity increases to 11 liters across the Legend 130, Legend 145, and Legend 165, indicating a larger axle assembly suited to the higher-output configurations in the range.
- A 100-hour check interval is listed alongside the 1000-hour or 12-month change interval for the Legend 105, Legend 115, Legend 130, and Legend 145 front differentials, establishing a periodic inspection point well before a full fluid change is due.
- The Legend 165 front differential specification does not include a 100-hour check interval, carrying only the 1000-hour or 12-month change interval, which distinguishes its service schedule from the other variants in the range.
- Across all variants, the change interval is expressed as 1000 hours or 12 months, whichever comes first, meaning calendar time alone can trigger a fluid change even when operating hours remain low.
- All front differential service intervals in the specifications are assigned a normal use condition, meaning the listed hours and time intervals apply to standard operating environments rather than accelerated or severe-duty schedules.