Landini Globus

Coolant capacity & service interval

Landini Globus coolant capacity is 10 liters. Service intervals occur every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Globus 55 (2000-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Globus 65 (2000-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Globus 75 (2000-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Globus 50 (1997-1999)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Globus 60 (1997-1999)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Globus 70 (1997-1999)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • Every variant in the Landini Globus range covered by these specifications shares an identical cooling system capacity of 10 liters. In agricultural equipment, a cooling system capacity at this level is consistent with a service fill volume, meaning the figure reflects the amount of coolant required to refill the system during a standard drain-and-refill service rather than a full component overhaul.
  • The change interval across all six variants is set at 1000 hours or 12 months, whichever comes first. The dual-trigger format is standard practice in tractor servicing, where calendar time accounts for coolant degradation through oxidation and additive depletion even when operating hours remain low.
  • The specifications apply under normal use conditions for all listed variants. In the context of fluid service intervals, a normal use designation typically reflects standard field operation without the accelerated wear factors associated with severe-duty classifications such as extreme dust, prolonged idling, or heavy continuous loading.
  • The Globus range in these specifications is divided into two distinct production periods. The Globus 50, 60, and 70 models carry a 1997-1999 production span, while the Globus 55, 65, and 75 models are associated with a 2000-2005 span. Despite the generational separation, the cooling system capacity and service interval remain unchanged between the two groups.
  • The numerical designations within each production period follow a pattern of increasing model numbers, with the 1997-1999 group covering the 50, 60, and 70, and the 2000-2005 group covering the 55, 65, and 75. All six share the same 10-liter capacity specification, indicating no cooling system volume differentiation across the power variants within either generation.

Other Systems