Landini Globus
Brake fluid capacity & service interval
Landini Globus brake fluid capacity is 0,5 liter. Service intervals are 1000 hours or 12 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Globus 55 (2000-2005) |
|
| Globus 65 (2000-2005) |
|
| Globus 75 (2000-2005) |
|
| Globus 50 (1997-1999) |
|
| Globus 60 (1997-1999) |
|
| Globus 70 (1997-1999) |
|
Additional Notes
- Across all six Landini Globus variants covered, the hydraulic brake system capacity is uniformly 0.5 liter. In brake system servicing, this figure represents the total fluid volume held within the system, including the master cylinder reservoir and brake lines, rather than a larger overhaul or full-flush quantity.
- The 1997-1999 variants — the Globus 50, 60, and 70 — each carry an explicit brake fluid change interval of 1,000 operating hours or 12 months, whichever comes first under normal use conditions. The dual-trigger format means the time-based threshold applies even when the hour count has not been reached, which is relevant for tractors with lower annual operating hours.
- The 2000-2005 variants — the Globus 55, 65, and 75 — share the same 0.5-liter capacity as the earlier generation but do not carry a stated change interval in the specifications. Only the capacity value is listed for those configurations.
- The model year boundary between the 1997-1999 and 2000-2005 groups aligns with a shift in model numbering, moving from even-numbered designations (50, 60, 70) to odd-numbered ones (55, 65, 75), which likely reflects a product generation update rather than a simple year-based revision.
- A 1,000-hour service interval is a common benchmark in agricultural equipment maintenance, reflecting the typical annual workload of a mid-range tractor in normal field use. The 12-month parallel interval accounts for fluid degradation over time, since brake fluid absorbs moisture regardless of operating hours.