Landini Discovery Plat

Differential fluid capacity & service interval

Landini Discovery Plat uses differential fluid with a capacity range of 5,5 to 6,5 liters. Service intervals occur every 1000 hours or 12 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 45, ITL 3102 IL (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Change 1000 hours/ 12 months
  • 50, ITL 3105 EL (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Change 1000 hours/ 12 months
  • 60, ITL 3100 FLT (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Change 1000 hours/ 12 months
  • 60W, ITL 4100 FL (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5-6,5 liter
  • Change 1000 hours/ 12 months
  • 75, ITL 4100 FLT/ELT (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Change 1000 hours/ 12 months
  • 75BW, ITL 4100 ELT (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5-6,5 liter
  • Change 1000 hours/ 12 months
  • 75W, 4100 FLT (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5-6,5 liter
  • Change 1000 hours/ 12 months
  • 95BW, ITL 4100 ELT (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5-6,5 liter
  • Change 1000 hours/ 12 months
  • 95W, ITL 4105 FLT/ELT (2020- )
  • Front
  • Use: Normal
  • Capacity 5,5-6,5 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • The Landini Discovery Plat front differential capacity is listed as either a fixed 5.5 liters or a range of 5.5–6.5 liters, depending on the engine variant. A capacity range rather than a single fixed value typically reflects differences between a drain-and-refill service fill and a complete overhaul or dry fill, where additional fluid is needed to prime all internal passages.
  • The 45 (ITL 3102 IL), 50 (ITL 3105 EL), 60 (ITL 3100 FLT), and 75 (ITL 4100 FLT/ELT) variants all share a fixed front differential capacity of 5.5 liters, indicating a consistent housing volume across these configurations.
  • The 60W (ITL 4100 FL), 75BW (ITL 4100 ELT), 75W (4100 FLT), 95BW (ITL 4100 ELT), and 95W (ITL 4105 FLT/ELT) variants carry the wider 5.5–6.5 liter capacity range for the front differential. The "W" and "BW" designations in the model names are associated with wider-axle configurations, which may account for the larger potential fluid volume.
  • All nine configurations share an identical front differential change interval of 1,000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format means a tractor used infrequently could still reach the calendar threshold before the hour meter does.
  • The 1,000-hour service interval for the front differential is a relatively standard figure for agricultural tractor axle components. At typical seasonal usage rates, 1,000 hours often aligns closely with the 12-month calendar interval, making the dual-trigger specification practical for both high- and low-utilization operators.
  • All specifications apply under normal use conditions. In agricultural equipment contexts, normal use is generally distinguished from severe use, which would involve sustained heavy draft loads, extreme temperatures, or frequent water crossings. No severe-use interval is listed for any of the nine configurations.

Other Systems