Landini Discovery Plat

Coolant capacity & service interval

Landini Discovery Plat uses coolant with a capacity of 10 liters. Service intervals occur every 2000 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
45, ITL 3102 IL (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
50, ITL 3105 EL (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
60, ITL 3100 FLT (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
60W, ITL 4100 FL (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
75, ITL 4100 FLT/ELT (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
75BW, ITL 4100 ELT (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
75W, 4100 FLT (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
95BW, ITL 4100 ELT (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months
95W, ITL 4105 FLT/ELT (2020- )
  • Use: Normal
  • Capacity 10 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • The Landini Discovery Plat cooling system capacity is 10 liters across all listed configurations, from the 45 with the ITL 3102 IL engine through to the 95W with the ITL 4105 FLT/ELT engine. A uniform 10-liter figure across a range of engine displacements and power outputs points to a shared cooling circuit architecture rather than engine-specific sizing.
  • The coolant change interval is set at 2000 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format is standard practice in agricultural equipment servicing, accounting for machines that accumulate hours slowly and may reach the calendar threshold before the hour threshold.
  • A 2000-hour interval is relatively extended for agricultural tractor coolant, reflecting modern long-life coolant formulations that resist silicate depletion and corrosion inhibitor breakdown over prolonged service periods.
  • All nine configurations share the same 10-liter capacity and 2000-hour/24-month interval, despite spanning three-cylinder engines (ITL 3102 IL, ITL 3105 EL, ITL 3100 FLT) and four-cylinder engines (ITL 4100 and ITL 4105 series). The consistency across cylinder counts suggests the cooling system volume is determined by the tractor platform rather than individual engine displacement.
  • The "W" and "BW" designations in models such as the 60W, 75W, 75BW, 95BW, and 95W typically denote wide-axle or vineyard-specific configurations. Despite these structural differences from standard variants, the cooling system capacity and service interval remain identical at 10 liters and 2000 hours/24 months.
  • The 10-liter capacity listed represents the full cooling system fill, encompassing the engine block, cylinder head passages, radiator, and associated hoses. A figure of this scale is consistent with a complete system service volume rather than a partial top-up quantity.

Other Systems