Landini Blizzard
Coolant capacity & service interval
Landini Blizzard coolant capacity ranges from 10,5 to 15 liters. Service intervals require changes every 1000 hours or 12 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Blizzard 95 (1993-2000) |
|
| Blizzard 50 (1992-2000) |
|
| Blizzard 60 (1992-2000) |
|
| Blizzard 65 (1992-2000) |
|
| Blizzard 75 (1992-2000) |
|
| Blizzard 85 (1992-2000) |
|
Additional Notes
- The Landini Blizzard 50 and Blizzard 60 share a cooling system capacity of 10.5 liters, while the Blizzard 65, 75, 85, and 95 each require 15 liters, reflecting the larger engine displacement in the higher-output models.
- The 15-liter capacity across the Blizzard 65 through 95 indicates a greater volume of coolant circulating through a larger engine block, which is typical of higher-horsepower agricultural tractor engines where thermal load management demands more fluid.
- All six Blizzard variants share a uniform service interval of 1,000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format is standard practice for machinery that may accumulate hours at varying rates depending on seasonal workload.
- The Blizzard 95 carries a production start year of 1993, one year later than the 1992 start date of the other five models in the range, while still sharing the same 2000 end year and the same 1,000-hour or 12-month coolant change interval.
- A 10.5-liter cooling system capacity, as seen on the Blizzard 50 and 60, is consistent with smaller four-cylinder tractor engines, where the reduced coolant volume corresponds to a more compact cooling circuit.
- The 1,000-hour interval on agricultural tractors is a common benchmark tied to seasonal operation patterns, where 12 months often passes before 1,000 hours are reached, making the calendar-based trigger the more frequently applicable condition in lighter-use scenarios.