Landini Blizzard

Brake fluid capacity & service interval

Landini Blizzard brake fluid capacity is 0,5 liter. Service intervals include checks at 100 hours and changes at 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Blizzard 95 (1993-2000)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Blizzard 50 (1992-2000)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Blizzard 60 (1992-2000)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Blizzard 65 (1992-2000)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Blizzard 75 (1992-2000)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Blizzard 85 (1992-2000)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • All six Landini Blizzard variants covered in these specifications share an identical hydraulic brake system fluid capacity of 0.5 liter, indicating a compact, uniform reservoir design across the model range from the Blizzard 50 through the Blizzard 95.
  • The 0.5 liter figure represents a service fill capacity, meaning the volume required to maintain or refill the hydraulic brake circuit under normal operating conditions rather than a full system overhaul quantity.
  • A check interval of every 100 hours applies to all listed variants under normal use conditions, reflecting the relatively frequent monitoring expected of hydraulic brake fluid in agricultural tractor operation, where contamination and moisture absorption can affect braking performance over time.
  • The change interval is specified at 1000 hours or 12 months, whichever comes first, under normal use conditions. The dual threshold accounts for both high-hour working tractors and lower-utilization machines where calendar aging of the fluid becomes the limiting factor before the hour threshold is reached.
  • The Blizzard 50, 60, 65, 75, and 85 share a production window of 1992-2000, while the Blizzard 95 carries a start year of 1993, making all brake fluid specifications for the 95 applicable from that year onward within the same overall period.
  • The consistent 0.5 liter capacity across models of differing power outputs, from the Blizzard 50 to the Blizzard 95, suggests the hydraulic brake circuit volume was not scaled with engine displacement or tractor size within this range.

Other Systems