Landini Advantage

Brake fluid capacity & service interval

Landini Advantage brake fluid capacity is 0,5 liter. Service intervals include checking every 100 hours and changing every 1000 hours or 12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Advantage 65 F, L, GT (1993-2000)
  • Rear
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Advantage 75 F, L, GT (1993-2000)
  • Front and rear
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Advantage 75 F, L, GT (1993-2000)
  • Rear
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Advantage 85 F, L, GT (1993-2000)
  • Front and rear
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Advantage 85 F, L, GT (1993-2000)
  • Rear
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Landini Advantage brake fluid capacity is 0.5 liter across all listed variants and brake circuit configurations, indicating a relatively modest hydraulic system volume consistent with compact agricultural tractor designs.
  • The 0.5 liter capacity figure applies uniformly whether referencing the rear-only hydraulic brake system or the combined front and rear hydraulic brake system, meaning the two circuits on applicable variants each carry the same individual fill volume.
  • The Advantage 65 F, L, and GT variants are specified with a rear hydraulic brake system only, while the Advantage 75 and 85 F, L, and GT variants each carry specifications for both a front and rear system and a rear-only system as separate service entries.
  • A fluid level check interval of 100 hours under normal use conditions applies to every listed configuration, reflecting a relatively frequent inspection cadence suited to working agricultural equipment.
  • The fluid change interval is set at 1000 hours or 12 months under normal use conditions, whichever comes first, meaning calendar time can trigger a service event independently of machine hours accumulated.
  • The 1000-hour change interval, paired with the 100-hour check interval, means a fluid level inspection is due approximately ten times before a full fluid replacement becomes necessary under normal operating conditions.
  • All five specification rows share identical capacity, check, and change values across the Advantage 65, 75, and 85 model designations for the 1993-2000 period, indicating no variation in brake fluid service requirements across those power ratings.

Other Systems