Landini Alpine

Coolant capacity & service interval

Landini Alpine uses coolant with a capacity of 10 liters. Service intervals include checking every 10 hours and changing every 1000 hours or 12 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Alpine 65 (2005-2010)
  • Use: Normal
  • Capacity 10 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Alpine 75 (2005-2010)
  • Use: Normal
  • Capacity 10 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
Alpine 85 (2005-2010)
  • Use: Normal
  • Capacity 10 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Landini Alpine 65, 75, and 85 all share an identical cooling system capacity of 10 liters, which represents the total system fill volume rather than a partial service quantity.
  • A check interval of 10 hours applies to the cooling system across all three models, reflecting a frequent inspection cycle typical of agricultural equipment operating under sustained load conditions.
  • The change interval is set at 1000 hours or 12 months under normal use conditions, meaning whichever threshold is reached first would govern when a coolant replacement is due.
  • The 12-month calendar limit on coolant changes exists because coolant additives degrade over time regardless of engine hours accumulated, making time an independent service trigger alongside the 1000-hour mark.
  • The uniform 10-liter capacity across the Alpine 65, 75, and 85 indicates no variation in cooling system volume despite the differing power outputs associated with each model designation.

Other Systems