Landini 60 Series
Differential fluid capacity & service interval
Landini 60 Series differential fluid capacity is 5,8 liters. Service intervals occur every 1000 hours or 12 months. Data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- All five configurations in the Landini 60 Series covered here share an identical front differential fluid capacity of 5.8 liters, applying specifically to 4x4 variants without brakes.
- The 5.8-liter figure represents a service fill capacity, meaning the volume required when draining and refilling the front differential during a scheduled fluid change rather than a full overhaul or dry-build quantity.
- The change interval across all listed configurations is 1,000 hours or 12 months under normal use conditions, whichever comes first. In tractor applications, a dual time-and-calendar interval of this kind accounts for both high-hour working machines and lower-utilization units where calendar aging of the fluid becomes the limiting factor.
- The 6865 Evolution, 7865 Evolution, and 8865 Evolution variants all use the Perkins 1104C-44 engine, while the 7860s and 8860s variants use the Perkins 1104A-44 engine. Despite the difference in engine designation between the two engine families, the front differential fluid capacity and change interval remain the same at 5.8 liters and 1,000 hours/12 months.
- The specifications apply only to front differentials configured without brakes. Front axle differentials on tractors can be built with or without integrated brake assemblies, and the absence of brakes in all listed configurations here means no additional brake-related fluid volume is factored into the 5.8-liter capacity figure.