Landini 60 Series

Coolant capacity & service interval

Landini 60 Series coolant capacity ranges from 10,5 to 15,5 liters. Service intervals require changes every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5865 Evolution, Perkins 1103C-33 (2013- )
  • Use: Normal
  • Capacity 10,5 liter
  • Change 1000 hours/ 12 months
6865 Evolution, Perkins 1104C-44 (2013- )
  • Use: Normal
  • Capacity 15,5 liter
  • Change 1000 hours/ 12 months
7860s, Perkins 1104A-44 (2013- )
  • Use: Normal
  • Capacity 15,5 liter
  • Change 1000 hours/ 12 months
7865 Evolution, Perkins 1104C-44 (2013- )
  • Use: Normal
  • Capacity 15,5 liter
  • Change 1000 hours/ 12 months
8860s, Perkins 1104A-44 (2013- )
  • Use: Normal
  • Capacity 15,5 liter
  • Change 1000 hours/ 12 months
8865 Evolution, Perkins 1104C-44 (2013- )
  • Use: Normal
  • Capacity 15,5 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • The Landini 60 Series cooling system capacities split into two distinct values across the model range. The 5865 Evolution, fitted with the Perkins 1103C-33 three-cylinder engine, holds 10.5 liters, while all models equipped with the four-cylinder Perkins 1104-series engines hold 15.5 liters.
  • The smaller 10.5-liter capacity of the 5865 Evolution reflects the reduced block and jacket volume of the 1103C-33, a three-cylinder unit with a displacement of approximately 3.3 liters, compared to the larger 4.4-liter displacement of the four-cylinder engines used across the rest of the range.
  • The 15.5-liter cooling system capacity is shared by five models: the 6865 Evolution, 7860s, 7865 Evolution, 8860s, and 8865 Evolution. All five use either the Perkins 1104A-44 or 1104C-44 engine, both of which are four-cylinder units within the same displacement family.
  • The 1104A-44 and 1104C-44 are related Perkins engine variants. The "A" and "C" designations indicate different specification tiers within the same base architecture, yet both share the same 15.5-liter cooling system capacity across the 60 Series models where each is fitted.
  • A uniform coolant change interval of 1,000 hours or 12 months, whichever comes first, applies to all six configurations under normal use conditions. The dual-trigger structure means the calendar limit can be reached before the hour threshold on lower-utilization equipment.
  • The 1,000-hour service interval for coolant is a standard figure for agricultural tractors in this class. At typical field operation rates, 1,000 hours often corresponds to several seasons of use, making the 12-month calendar interval the more frequently binding condition for seasonal machinery.

Other Systems