Landini 2 series

Differential fluid capacity & service interval

Landini 2 series differential fluid capacity is 4,8 liters plus hub reductions. Service intervals are 1000 hours or 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 2-045 GE, 4TNV84-KLAN (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months
  • 2-045 STD, 4TNV84-KLAN (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months
  • 2-050 GE, 4TNV88-KLAN (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months
  • 2-050 STD, 4TNV88-KLAN (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months
  • 2-055 GE, 4TNV84T-ZXKL (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months
  • 2-055 STD, 4TNV84T-ZXKL (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months
  • 2-060 GE, 4TNV84T-ZXLAN (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months
  • 2-060 STD, 4TNV84T-ZXLAN (2016- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter (+ hub reductions)
  • Change 1000 hours/ 12 months

Additional Notes

  • All eight configurations in the Landini 2 Series covered here share an identical front differential fluid capacity of 4.8 liters. This figure represents the differential housing fill alone, as hub reductions carry additional fluid volume beyond that base capacity.
  • The 4.8-liter capacity notation with the addendum of hub reductions signals that total system fluid volume exceeds the stated figure. Hub reduction units, being separate gear chambers at each wheel end, require their own fill quantities on top of the differential housing amount.
  • The change interval of 1,000 hours or 12 months, whichever comes first, applies under normal use conditions across all listed configurations. The dual-trigger format means calendar time alone can mandate a fluid change even when the hour threshold has not been reached.
  • The 2 Series lineup spans two distinct engine displacements in naturally aspirated form. The 2-045 variants use the 4TNV84-KLAN engine, while the 2-050 variants use the larger 4TNV88-KLAN, yet both share the same 4.8-liter front differential capacity and identical service interval.
  • The 2-055 and 2-060 variants both use turbocharged Yanmar engines, the 4TNV84T-ZXKL and 4TNV84T-ZXLAN respectively. Despite the difference in engine designation between those two models, the front differential capacity and change interval remain consistent with the naturally aspirated variants in the same series.
  • Within each power rating, GE and STD transmission variants carry no difference in front differential fluid capacity or service interval. Both trim types across the 2-045, 2-050, 2-055, and 2-060 models are specified at 4.8 liters with a 1,000-hour or 12-month change schedule under normal conditions.

Other Systems