Landini 2 series

Coolant capacity & service interval

Landini 2 series coolant capacity is 10 liters. Service intervals are 1000 hours or 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
2-045 GE, 4TNV84-KLAN (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
2-045 STD, 4TNV84-KLAN (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
2-050 GE, 4TNV88-KLAN (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
2-050 STD, 4TNV88-KLAN (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
2-055 GE, 4TNV84T-ZXKL (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
2-055 STD, 4TNV84T-ZXKL (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
2-060 GE, 4TNV84T-ZXLAN (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
2-060 STD, 4TNV84T-ZXLAN (2016- )
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • The Landini 2 Series cooling system capacity is 10 liters across all listed configurations, covering the 2-045, 2-050, 2-055, and 2-060 models. A uniform 10-liter figure across multiple engine variants points to a shared cooling circuit architecture rather than engine-specific sizing.
  • The 2-045 GE and 2-045 STD both use the Yanmar 4TNV84-KLAN engine, and both carry the same 10-liter cooling system capacity. The GE and STD designations reflect cab or equipment trim differences rather than any variation in the cooling circuit volume.
  • The 2-050 GE and 2-050 STD are fitted with the 4TNV88-KLAN engine, which is a larger-displacement Yanmar unit compared to the 4TNV84-KLAN found in the 2-045 models. Despite the displacement difference, the cooling system capacity remains at 10 liters.
  • The 2-055 and 2-060 models use turbocharged Yanmar engines, the 4TNV84T-ZXKL and 4TNV84T-ZXLAN respectively. The "T" in the engine designation indicates a turbocharged variant, yet the cooling system capacity holds at 10 liters, consistent with the naturally aspirated models in the same series.
  • The coolant change interval for all listed configurations under normal use conditions is 1000 hours or 12 months, whichever comes first. The dual-trigger format, combining an operating-hour threshold with a calendar limit, accounts for machines that accumulate hours slowly and would otherwise go extended calendar periods without a fluid change.
  • The 1000-hour service interval is a common benchmark in agricultural machinery, broadly aligning with seasonal or annual usage patterns typical of compact utility tractors. At that interval, coolant additives such as corrosion inhibitors are generally considered to have reached the end of their effective service life.
  • All eight configurations carry a normal use condition designation. In fluid service contexts, normal use typically reflects standard operating environments without the accelerated thermal or contamination stress associated with severe-duty classifications, which often carry shorter change intervals.

Other Systems