Lamborghini Spire S VRT

Differential fluid capacity & service interval

Lamborghini Spire S VRT differential fluid capacity is 6 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Spire S 100 VRT, Stage 5->ZKDHE40200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 105 VRT, Stage 5->ZKDHE60200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 115 VRT, Stage 5->ZKDKJ50200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 90 VRT, Stage 5->ZKDHE30200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 95 VRT, Stage 5->ZKDHE50200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 100 VRT, ->ZKDEK60200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 105 VRT, ->ZKDEL40200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 115 VRT, ->ZKDEL80200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 90 VRT, ->ZKDEK20200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire S 90.4 VRT, ->ZKDEL00200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Lamborghini Spire S VRT front differential fluid capacity is 6 liters across all configurations listed, covering the 90, 90.4, 100, 105, and 115 VRT variants from 2017-2021 as well as the Stage 5 variants starting from 2021. A consistent 6-liter capacity across such a range of power variants indicates a shared differential housing design rather than unit-specific sizing.
  • Service intervals for the front differential are expressed in operating hours rather than distance, which is standard practice for agricultural and off-highway machinery where annual mileage is not a reliable measure of mechanical wear.
  • The fluid check interval is set at 300 hours under normal use conditions. A check interval shorter than the change interval allows for early detection of fluid contamination or level loss without committing to a full fluid replacement at each inspection.
  • The change interval is specified at 1200 hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format means calendar time can mandate a fluid change even when the hourly threshold has not been reached, which is relevant for equipment operated at low annual hours.
  • The 2017-2021 variants are each identified by a serial number ceiling (e.g., up to ZKDEK60200TL50001 for the Spire S 100 VRT), while the Stage 5 variants introduced in 2021 are identified by a serial number floor, reflecting a production transition point rather than a model year boundary alone.
  • The Spire S 90.4 VRT appears only in the 2017-2021 serial range and has no corresponding Stage 5 variant listed, whereas the 90, 100, 105, and 115 VRT designations each have a Stage 5 counterpart. The 95 VRT designation appears exclusively as a Stage 5 variant with no pre-Stage 5 entry in the specifications.
  • All rows carry a normal use condition designation. In service specification contexts, normal use typically refers to operation within standard load, temperature, and duty-cycle parameters as defined by the manufacturer, as opposed to severe or extended-duty classifications that would shorten intervals.

Other Systems