Lamborghini Spire S VRT

Brake fluid capacity & service interval

Lamborghini Spire S VRT requires 1 liter of brake fluid. Service intervals occur every 50 hours. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Spire S 100 VRT, Stage 5->ZKDHE40200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 105 VRT, Stage 5->ZKDHE60200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 115 VRT, Stage 5->ZKDKJ50200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 90 VRT, Stage 5->ZKDHE30200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 95 VRT, Stage 5->ZKDHE50200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 100 VRT, ->ZKDEK60200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 105 VRT, ->ZKDEL40200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 115 VRT, ->ZKDEL80200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 90 VRT, ->ZKDEK20200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire S 90.4 VRT, ->ZKDEL00200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours

Additional Notes

  • The Lamborghini Spire S VRT brake fluid capacity is 1 liter across all listed variants, from the 90 VRT through to the 115 VRT. A 1-liter figure for a hydraulic brake system reflects a service fill volume, meaning the amount of fluid required to properly fill and bleed the system during a routine service rather than a full component overhaul.
  • The brake fluid change interval is set at 50 hours under normal use conditions for every variant in the specification set. In small-displacement or recreational vehicle contexts, hour-based intervals are standard practice because annual mileage can vary widely, making elapsed engine or operating hours a more reliable measure of fluid degradation.
  • Brake fluid absorbs moisture over time through a process called hygroscopic absorption, which lowers its boiling point and reduces braking effectiveness. A 50-hour change interval under normal use conditions reflects the need to manage this moisture uptake before it compromises hydraulic brake system performance.
  • The specifications distinguish between two distinct serial number cutoff groups: variants with VIN sequences ending before a defined chassis number covering 2017-2021, and Stage 5 variants with VIN sequences starting from a defined chassis number associated with 2021 onward. Despite this generational split, both groups share identical 1-liter capacity and 50-hour change interval values.
  • The power output designations across the Spire S VRT range span from the 90 VRT to the 115 VRT, with the 90.4 VRT and 95 VRT also represented. Across all of these engine output variants, the hydraulic brake system capacity and service interval remain uniform at 1 liter and 50 hours respectively, indicating the brake circuit design does not scale with engine output in this model range.
  • The Spire S 90.4 VRT appears only in the 2017-2021 pre-Stage 5 group, while a Spire S 95 VRT appears only in the Stage 5 group. Both carry the same 1-liter capacity and 50-hour change interval under normal use conditions as all other variants in the specification set.

Other Systems