Lamborghini R7
Coolant capacity & service interval
Lamborghini R7 coolant capacity is 34 liters. Service intervals include a check at 10 hours and a change at 1000 hours or 12 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| R7.190 DCR, Stage 3A (2008-2015) |
|
| R7.190 DCR, Stage 3A->ZKDU0602W0LL10010 (2008-2015) |
|
| R7.210, Stage 3A (2008-2015) |
|
| R7.210 DCR, Stage 3A->10010 (2008-2015) |
|
| R7.220 DCR, Stage 3A (2008-2015) |
|
Additional Notes
- The Lamborghini R7 cooling system holds 34 liters across all listed configurations, which is a substantial capacity consistent with the demands of a large agricultural tractor engine.
- The 34-liter capacity figure applies uniformly to the R7.190 DCR Stage 3A, R7.210 DCR Stage 3A, R7.210 Stage 3A, and R7.220 DCR Stage 3A variants spanning 2008-2015.
- A coolant level check interval of 10 hours is specified for all listed configurations, reflecting the frequency typical of heavy-duty agricultural equipment operating under continuous or near-continuous load conditions.
- The coolant change interval is set at 1000 hours or 12 months, whichever comes first, for all configurations under normal use conditions.
- The dual-trigger change interval of 1000 hours or 12 months means calendar time can mandate a coolant change even when the hourly threshold has not been reached, which is relevant for equipment used seasonally or at lower annual hours.
- The R7.190 DCR Stage 3A has a serial number-delimited variant noted as running up to ZKDU0602W0LL10010, sharing identical cooling system capacity and interval specifications with the non-delimited version of the same engine configuration.
- Similarly, the R7.210 DCR Stage 3A carries a serial number boundary noted as up to 10010, yet the cooling system specifications remain unchanged at 34 liters with the same check and change intervals as all other listed variants.