Lamborghini R4 COM3

Differential fluid capacity & service interval

Lamborghini R4 COM3 differential fluid capacity is 6 liters. Service intervals include checking every 250 hours and changing every 1000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • R4.100, ->10001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
  • R4.100 VRT (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
  • R4.110, ->15001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
  • R4.110 VRT (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months

Additional Notes

  • The Lamborghini R4 COM3 front differential holds 6 liters of fluid across all four configurations covered in the 2010-2015 range, including the R4.100 VRT, R4.100 (serial ->10001), R4.110 VRT, and R4.110 (serial ->15001).
  • A 6-liter front differential capacity is a relatively substantial fill volume, consistent with the heavy-duty axle assemblies found in agricultural tractors of this class.
  • Under normal use conditions, the front differential fluid on all listed configurations is subject to a check interval of every 250 hours, which serves as a routine monitoring point rather than a full fluid replacement.
  • The change interval for front differential fluid across all four configurations is set at 1000 hours or 24 months under normal use conditions, whichever comes first, meaning time elapsed can trigger a service requirement even before the hour threshold is reached.
  • No variation in fluid capacity or service intervals exists between the VRT variants and the serial-numbered variants within the same engine designation, as both the R4.100 VRT and R4.100 (->10001) share identical specifications, and the same holds for the R4.110 pairing.
  • The serial number designations (->10001 for the R4.100 and ->15001 for the R4.110) indicate production cutoff points, distinguishing earlier-build units from the VRT-equipped variants within the same model year span.

Other Systems