Lamborghini R4 COM3

Automatic transmission fluid capacity & service interval

Lamborghini R4 COM3 uses automatic transmission fluid with a capacity of 52 liters. Service intervals include a check at 50 hours and a change at 1000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
R4.100, ->10001 (2010-2015)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
R4.100 VRT (2010-2015)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
R4.110, ->15001 (2010-2015)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
R4.110 VRT (2010-2015)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months

Additional Notes

  • The Lamborghini R4 COM3 transaxle/transmission holds 52 liters of automatic transmission fluid across all four configurations covered for 2010-2015, a capacity consistent with large agricultural or industrial transaxle assemblies rather than passenger vehicle gearboxes.
  • The R4.100 VRT and R4.110 VRT variants share an identical 52-liter fill capacity with their respective non-VRT counterparts, indicating no difference in fluid volume requirements between VRT and standard configurations within the same engine displacement class.
  • The R4.100 (serial range up to 10001) and R4.110 (serial range up to 15001) are distinguished by serial number cutoffs, and both carry the same 52-liter capacity and service intervals as the VRT variants of the same displacement.
  • A fluid level check interval of 50 hours applies under normal use conditions across all four configurations, reflecting a relatively frequent inspection schedule relative to the full change interval.
  • The fluid change interval is set at 1000 hours or 24 months under normal use conditions, meaning whichever threshold is reached first would govern the service event in typical operational practice.
  • The 24-month calendar limit on fluid changes means that even low-hour units accumulating fewer than 1000 hours within two years are still subject to a fluid change, tying service to elapsed time as well as operational load.
  • All four configurations carry a normal use condition designation, meaning the 1000-hour/24-month change interval and 50-hour check interval are not adjusted for severe duty in the specifications provided for 2010-2015.

Other Systems