Lamborghini R3 T-TB

Power steering fluid capacity & service interval

Lamborghini R3 T-TB requires 52 liters of power steering fluid. Service intervals include checking every 10 hours and changing every 1200 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • R3.T 75 (2008-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R3.T 85 (2008-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R3.T 95 (2008-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R3.TB 75 (2008-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R3.TB 85 (2008-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R3.TB 95 (2008-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Lamborghini R3 T-TB power steering fluid system is shared with the transaxle and hydraulic system, meaning a single 52-liter fluid reservoir serves all three functions simultaneously across every listed configuration.
  • A 52-liter capacity is substantially larger than what is found in typical automotive power steering systems, reflecting the demands of agricultural and utility machinery, where hydraulic circuits power multiple implement and steering functions from a common reservoir.
  • All six configurations — the R3.T 75, R3.T 85, R3.T 95, R3.TB 75, R3.TB 85, and R3.TB 95 — carry identical capacity, check interval, and change interval specifications for the 2008-2009 model years.
  • The check interval of every 10 operating hours indicates a high-frequency monitoring requirement, consistent with machinery operating under continuous hydraulic load where fluid condition and level can change rapidly.
  • The change interval is set at 1,200 hours or 12 months under normal use conditions, whichever comes first. The dual threshold means calendar time governs fluid replacement even when operating hours remain low.
  • The R3.T and R3.TB variants share the same 52-liter fluid capacity despite representing mechanically distinct configurations, suggesting the hydraulic and power steering circuit architecture is consistent across both transmission types in the 2008-2009 range.
  • The three power ratings — 75, 85, and 95 — within each variant group produce no variation in fluid capacity or service intervals, indicating the hydraulic system sizing was not adjusted to match engine output differences across the lineup.

Other Systems