Lamborghini R3 T-TB

Differential fluid capacity & service interval

Lamborghini R3 T-TB differential fluid capacity is 6 liters. Service intervals include a check at 10 hours and a change at 1200 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • R3.T 75 (2008-2009)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • R3.T 85 (2008-2009)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • R3.T 95 (2008-2009)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • R3.TB 75 (2008-2009)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • R3.TB 85 (2008-2009)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • R3.TB 95 (2008-2009)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • The Lamborghini R3 T-TB front differential holds 6 liters of fluid across all six configurations spanning the R3.T and R3.TB variants in the 75, 85, and 95 power ratings. A 6-liter capacity is relatively substantial for a front differential, reflecting the heavy-duty drivetrain demands typical of agricultural tractors in this class.
  • Fluid level checks are scheduled at every 10 operating hours across all R3.T and R3.TB configurations. In tractor applications, short check intervals like 10 hours are standard practice during early service periods or for components subject to contamination from field conditions.
  • The fluid change interval is set at 1200 hours or 12 months, whichever comes first, for all six configurations. The dual-trigger format — combining an hour-based threshold with a calendar-based one — accounts for machines that accumulate operating hours slowly, ensuring fluid degradation over time does not go unaddressed.
  • All six rows carry a normal use condition designation. In equipment service specifications, normal use typically refers to operation within standard load, temperature, and terrain parameters, as opposed to severe conditions such as sustained heavy draft work or extreme climates.
  • The specifications are uniform across the R3.T and R3.TB sub-series for the front differential. The TB designation in tractor nomenclature commonly indicates a variant with a front loader or additional front-end equipment, yet the front differential fluid capacity and service intervals remain identical to the standard R3.T configurations.
  • The 75, 85, and 95 designations within both the R3.T and R3.TB lines most likely refer to engine power output in horsepower or metric horsepower. Despite the differences in power rating across these three variants, the front differential fluid capacity and service schedule are consistent at 6 liters, 10-hour checks, and 1200-hour or 12-month changes.

Other Systems