Krone Big M II

Coolant capacity & service interval

Krone Big M II uses coolant with a capacity of 44 liters. Service intervals include checks every 10 hours and changes every 3000 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Big M II, 502.000->549.999 (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours
Big M II CM, 602.000-> (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours
Big M II CRi, 550.000->577.949 (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours
Big M II CRi, 577.950->601.999 (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours
Big M II CRi, 602.000-> (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours
Big M II CV, 550.000->577.949 (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours
Big M II CV, 577.950->601.999 (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours
Big M II CV, 602.000-> (2004-2011)
  • Use: Normal
  • Capacity 44 liter
  • Check 10 hours
  • Change 3000 hours

Additional Notes

  • The Krone Big M II cooling system capacity is 44 liters across all variants and serial number ranges covered in the 2004-2011 specifications. A 44-liter figure is consistent with large-displacement agricultural machinery engines, where substantial coolant volume is needed to manage heat across extended field operation cycles.
  • The coolant check interval is set at every 10 hours of operation under normal use conditions. In agricultural equipment, a 10-hour check interval reflects the high thermal and mechanical demands placed on cooling systems during continuous harvesting work, where early detection of coolant loss can prevent engine damage.
  • The coolant change interval is 3000 hours under normal use conditions. For a machine operating in seasonal agricultural cycles, 3000 hours represents a multi-year service life between full coolant replacements, which aligns with extended-life coolant formulations commonly specified for heavy machinery.
  • All eight configurations — spanning the CM, CRi, and CV variants as well as the base serial range 502.000-549.999 — share identical cooling system specifications. The uniformity across serial number breaks such as 550.000-577.949, 577.950-601.999, and 602.000 onward indicates no cooling system capacity or interval changes were introduced at those production boundaries.
  • The serial number segmentation within the CRi and CV variants into three distinct ranges (550.000-577.949, 577.950-601.999, and 602.000 onward) reflects production-based classification rather than any difference in cooling system service requirements, since all three ranges carry the same 44-liter capacity and identical check and change intervals.

Other Systems