Krone Big M I
Coolant capacity & service interval
Krone Big M I uses coolant with a capacity of 50 liters. Service intervals include checks every 10 hours and changes every 3000 hours. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Big M, 440.100->490.00 (1999-2004) |
|
Additional Notes
- The cooling system capacity for the Krone Big M I is 50 liters, which represents a full system fill volume typical of large-capacity agricultural machinery with substantial engine cooling demands.
- A coolant level check interval of every 10 hours places routine inspection on a very frequent cycle, consistent with the operational intensity of a high-output self-propelled mower-conditioner.
- The coolant change interval is specified at 3,000 hours, a figure that reflects long-term fluid degradation thresholds rather than calendar-based replacement schedules common in lighter equipment.
- Both the check and change intervals are assigned under normal use conditions, meaning the 10-hour check cycle and 3,000-hour drain interval apply to standard field operation within the 1999-2004 production span covered by serial range 440.100 onward through 490.00.