Kioti/Daedong PX
Coolant capacity & service interval
Kioti/Daedong PX coolant capacity is 13,9 liters. Service intervals include checking every 10 hours and changing every 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| PX1002 C, Perkins 1104C-44TA |
|
| PX1002 PC, Perkins 1104C-44TA |
|
| PX7520 PC, Perkins 1104C-44 |
|
| PX9020 (R), Perkins 1104C-44TA |
|
| PX9020 C, Perkins 1104C-44TA |
|
Additional Notes
- All five configurations in the Kioti/Daedong PX series share an identical cooling system capacity of 13.9 liters, which represents the total service fill volume for the entire cooling circuit.
- The PX1002 C and PX1002 PC both use the Perkins 1104C-44TA engine and carry the same 13.9-liter cooling system capacity, indicating no volumetric difference between the cab and platform cab variants at that power level.
- The PX7520 PC is fitted with the naturally aspirated Perkins 1104C-44, while the PX9020 variants use the turbocharged 1104C-44TA, yet both engine families share the same 13.9-liter cooling system capacity.
- A coolant check interval of 10 hours applies across all listed configurations under normal use conditions, reflecting a very frequent early-operation monitoring requirement typical of high-load agricultural equipment.
- The coolant change interval is set at 24 months for all configurations under normal use conditions, meaning the service schedule is governed by elapsed calendar time rather than operating hours alone.
- The PX9020 (R), PX9020 C, PX1002 C, and PX1002 PC all share the Perkins 1104C-44TA engine designation, and all carry the same 13.9-liter capacity and 24-month change interval, showing no variation in cooling system service requirements across those four configurations.