John Deere 5015 F/V series

Differential fluid capacity & service interval

John Deere 5015 F/V series differential fluid capacity ranges from 3,8 to 5 liters. Service intervals include checking at 250 hours and changing at 1500 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 5215F/V (2003-2008)
  • Front
  • Use: Normal
  • Capacity 5 liter (F type)
  • Capacity 3,8 liter (V type)
  • Check 250 hours
  • Change 1500 hours
  • 5315F/V (2003-2008)
  • Front
  • Use: Normal
  • Capacity 5 liter (F type)
  • Capacity 3,8 liter (V type)
  • Check 250 hours
  • Change 1500 hours
  • 5515F/V (2003-2008)
  • Front
  • Use: Normal
  • Capacity 5 liter (F type)
  • Capacity 3,8 liter (V type)
  • Check 250 hours
  • Change 1500 hours
  • 5615F/V (2003-2008)
  • Front
  • Use: Normal
  • Capacity 5 liter (F type)
  • Capacity 3,8 liter (V type)
  • Check 250 hours
  • Change 1500 hours

Additional Notes

  • The John Deere 5015 F/V series front differential carries two distinct capacity figures depending on axle type: the F type holds 5 liters, while the V type holds 3.8 liters.
  • The 1.2-liter difference between the F type and V type front differential capacities reflects a physical size distinction between the two axle configurations rather than a difference in service interval requirements.
  • All four models in the 5015 F/V series, covering the 5215, 5315, 5515, and 5615, share identical front differential capacity and service interval specifications across the 2003-2008 production range.
  • A front differential fluid check interval of 250 hours applies under normal use conditions across the entire 5215-5615 F/V range, indicating a relatively frequent monitoring schedule relative to the full drain interval.
  • The front differential fluid change interval is set at 1500 hours under normal use conditions, meaning the fluid is checked six times before a full drain and refill is due.
  • The 5-liter capacity of the F type front differential is a service fill figure, representing the amount of fluid required to bring the unit to its operating level during a standard drain-and-refill service.
  • The 3.8-liter capacity of the V type front differential similarly represents a service fill volume, and the lower figure compared to the F type suggests a more compact axle housing design in the V configuration.

Other Systems