John Deere 5015 F/V series

Brake fluid capacity & service interval

John Deere 5015 F/V series brake fluid capacity is 0,32 liter. Service intervals include checking at 250 hours and changing at 1500 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5215F/V (2003-2008)
  • Use: Normal
  • Capacity 0,32 liter
  • Check 250 hours
  • Change 1500 hours
5315F/V (2003-2008)
  • Use: Normal
  • Capacity 0,32 liter
  • Check 250 hours
  • Change 1500 hours
5515F/V (2003-2008)
  • Use: Normal
  • Capacity 0,32 liter
  • Check 250 hours
  • Change 1500 hours
5615F/V (2003-2008)
  • Use: Normal
  • Capacity 0,32 liter
  • Check 250 hours
  • Change 1500 hours

Additional Notes

  • The John Deere 5015 F/V series hydraulic brake system holds a capacity of 0.32 liter across all four variants, the 5215F/V, 5315F/V, 5515F/V, and 5615F/V, which is a relatively small reservoir volume consistent with a dedicated brake fluid circuit rather than a shared hydraulic system.
  • All four variants share an identical check interval of 250 hours under normal use conditions, meaning fluid level and condition inspections are due well before any full fluid change is required.
  • The change interval for the hydraulic brake system fluid is specified at 1500 hours under normal use conditions, representing a long-cycle maintenance task relative to the 250-hour check interval.
  • The ratio between the check interval and the change interval is 1:6, meaning six fluid level checks are expected to occur for every one full fluid change across the 5215F/V, 5315F/V, 5515F/V, and 5615F/V models.
  • The 0.32-liter capacity figure applies uniformly across the 2003-2008 model years for all listed variants, indicating no capacity revision was introduced across the production span covered by these specifications.
  • All specifications across the four variants are designated for normal use conditions, and the 250-hour check and 1500-hour change intervals are tied directly to that use classification.

Other Systems