John Deere 5000 series

Coolant capacity & service interval

John Deere 5000 series coolant capacity ranges from 9,5 to 57 liters. Service intervals include checks at 10 and 250 hours, and changes at 1500 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5300 (1997-2001)
  • Use: Normal
  • Capacity 9,5 liter
  • Check 250 hours
  • Change 1500 hours/ 24 months
5300N (1997-2003)
  • Use: Normal
  • Capacity 9,5 liter
  • Check 250 hours
  • Change 1500 hours/ 24 months
5400 (1997-2003)
  • Use: Normal
  • Capacity 9,5 liter
  • Check 250 hours
  • Change 1500 hours/ 24 months
5400N (1997-2003)
  • Use: Normal
  • Capacity 9,5 liter
  • Check 250 hours
  • Change 1500 hours/ 24 months
5500 (1997-2003)
  • Use: Normal
  • Capacity 9,5 liter
  • Check 250 hours
  • Change 1500 hours/ 24 months
5500N (1997-2003)
  • Use: Normal
  • Capacity 9,5 liter
  • Check 250 hours
  • Change 1500 hours/ 24 months
5720 (1981-1992)
  • Use: Normal
  • Capacity 41,6 liter
  • Check 10 hours
  • Change 24 months
5730 (1981-1992)
  • Use: Normal
  • Capacity 42 liter
  • Check 10 hours
  • Change 24 months
5820 (1981-1992)
  • Use: Normal
  • Capacity 56,8 liter
  • Check 10 hours
  • Change 24 months
5830 (1981-1992)
  • Use: Normal
  • Capacity 57 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • The John Deere 5300, 5300N, 5400, 5400N, 5500, and 5500N all share an identical cooling system capacity of 9.5 liters, reflecting a common engine cooling architecture across the standard and narrow-frame variants produced from 1997 onward.
  • The 9.5-liter figure for the 5300 through 5500 series represents a service fill capacity, meaning the volume of coolant required during a standard drain and refill procedure under normal operating conditions.
  • Coolant checks on the 5300 through 5500 series are specified at 250-hour intervals, while full coolant changes are due at 1,500 hours or 24 months, whichever comes first. The dual-trigger change interval accounts for both heavy-use and lighter-use operating patterns.
  • The 5720 carries a cooling system capacity of 41.6 liters, while the 5730 holds 42 liters. The small difference between the two reflects minor variation in cooling circuit volume despite the models sharing the same production period of 1981-1992.
  • The 5820 and 5830 have cooling system capacities of 56.8 liters and 57 liters respectively, placing them in a substantially larger class than the 5720 and 5730. A capacity in the 57-liter range is consistent with larger-displacement or multi-cylinder engines requiring extended cooling circuit coverage.
  • The 5720, 5730, 5820, and 5830 all specify a coolant check interval of just 10 hours. An interval this short is typical of high-output or heavy-duty machinery where coolant condition and level are considered critical to safe continuous operation.
  • Unlike the 5300-5500 series, the 5720, 5730, 5820, and 5830 carry a change interval defined solely by a 24-month calendar period, with no hour-based threshold specified alongside it.

Other Systems