John Deere 5000 series

Brake fluid capacity & service interval

John Deere 5000 series brake fluid capacity ranges from 0,47 to 0,5 liters. Service intervals require a check every 100 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5720 (1981-1992)
  • Use: Normal
  • Capacity 0,47 liter
  • Check 100 hours
5730 (1981-1992)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
5820 (1981-1992)
  • Use: Normal
  • Capacity 0,47 liter
  • Check 100 hours
5830 (1981-1992)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours

Additional Notes

  • The John Deere 5000 series hydraulic brake system capacities across the 1981-1992 model range fall into two distinct values: 0.47 liters for the 5720 and 5820, and 0.5 liters for the 5730 and 5830.
  • A capacity figure listed for a hydraulic brake system typically represents the total fluid volume held within the system under normal operating fill conditions, not an overhaul or flush volume.
  • The 5730 and 5830 share an identical brake fluid capacity of 0.5 liters, while the 5720 and 5820 share an identical capacity of 0.47 liters, placing the two capacity groups along model number lines rather than year lines.
  • All four models carry a check interval of 100 hours, which in agricultural equipment terms refers to engine operating hours rather than calendar time, making the interval dependent on machine usage intensity.
  • The 100-hour check interval applies under normal use conditions across all four models, meaning the specified interval is not adjusted for severe operating environments in the available data.
  • The 0.03-liter difference between the two capacity groups is small in absolute terms but reflects a real distinction between the hydraulic brake system volumes of the 5720/5820 configuration and the 5730/5830 configuration.

Other Systems