JCB Fastrac 7000 Series

Brake fluid capacity & service interval

The JCB Fastrac 7000 Series uses brake fluid with a capacity of 0.75 liter. The data covers 8 configurations of this model.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 7170 (2009-2014)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Fastrac 7170 (2009-2014)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter (each)
  • Fastrac 7200 (2009-2014)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Fastrac 7200 (2009-2014)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter (each)
  • Fastrac 7230 (2009-2014)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Fastrac 7230 (2009-2014)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter (each)
  • Fastrac 7270 (2009-2014)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Fastrac 7270 (2009-2014)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter (each)

Additional Notes

  • Across all four variants of the JCB Fastrac 7000 Series covered here — the 7170, 7200, 7230, and 7270 — the front hydraulic brake system capacity is uniformly specified at 0.75 liter for the 2009-2014 model years.
  • The rear hydraulic brake system on each of the four variants also carries a capacity of 0.75 liter, with the specification expressed on a per-unit basis, meaning the "each" designation indicates individual rear brake circuit volumes rather than a combined total.
  • Because the rear brake capacity is listed as 0.75 liter each, a service fill addressing both rear circuits would require accounting for that figure twice, separate from the 0.75 liter allocated to the front system.
  • The front and rear brake system capacities being equal at 0.75 liter per circuit reflects a symmetrical hydraulic layout across all four variants in the 2009-2014 range.
  • All capacity figures across the 7170, 7200, 7230, and 7270 are designated under normal use conditions, meaning no differentiated interval or volume specification exists for severe-duty operation within the brake fluid data for these variants.
  • The consistency of the 0.75 liter figure across all variants and both front and rear positions suggests a shared brake system architecture among the 7170, 7200, 7230, and 7270 for the 2009-2014 period, with no capacity variation tied to the differing model designations.

Other Systems