JCB Fastrac 4000 Series
Brake fluid capacity & service interval
JCB Fastrac 4000 Series brake fluid capacity is 0,75 liter. Service intervals include a check at 10 hours and a change at 2000 hours or 24 months. The data covers 12 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across 2014-2022 entries, each front hydraulic brake system listing shows a brake fluid capacity of 0,75 liter under normal use. A capacity figure in a service chart commonly refers to the amount associated with routine system filling rather than a full component rebuild quantity.
- Each rear hydraulic brake system entry also lists 0,75 liter under normal use, so front and rear circuits are specified with the same brake fluid volume in every listed configuration.
- For JCB Fastrac 4000 Series brake fluid specifications, the check interval is 10 hours for every listed front and rear hydraulic brake system entry. A check interval refers to an inspection point rather than a replacement interval.
- The change interval is uniform at 2000 hours or 24 months in normal use for all listed rows. Dual interval formatting means service is tied to both operating hours and elapsed time.
- Fastrac 4160-1 with Agco 66 AWF Tier 4f in 2014-2020 carries the same brake fluid figures at both axle positions: front hydraulic brake system 0,75 liter, rear hydraulic brake system 0,75 liter, with checks at 10 hours and changes at 2000 hours or 24 months.
- Fastrac 4160-2 with Agco 66 AWF Stage V in 2020-2022 keeps the same normal-use brake fluid schedule and quantity as listed for the earlier 4160-1 configuration: 0,75 liter front, 0,75 liter rear, check 10 hours, change 2000 hours or 24 months.
- Fastrac 4190-1 with Agco 66 AWF Tier 4f in 2014-2020 is listed with identical front and rear hydraulic brake system values, each at 0,75 liter, alongside a 10-hour check interval and a 2000-hour or 24-month change interval in normal use.
- JCB Fastrac 4190-2 with Agco 66 AWF Stage V for 2020-2022 retains the same brake fluid service data as the related 4190-1 entries: 0,75 liter per front or rear hydraulic brake system, checked every 10 hours and changed every 2000 hours or 24 months in normal use.
- Fastrac 4220-1 with Agco 66 AWF Tier 4f in 2014-2020 follows the same pattern, with 0,75 liter specified for both front and rear hydraulic brake systems and the same normal-use timing of check 10 hours and change 2000 hours or 24 months.
- Fastrac 4220-2 with Agco 66 AWF Stage V in 2020-2022 is listed with unchanged brake fluid capacity and service interval figures relative to the paired 4220-1 entries: 0,75 liter for front, 0,75 liter for rear, plus 10-hour checks and 2000-hour or 24-month changes.