JCB Fastrac 1000 Series
Manual transmission fluid capacity & service interval
JCB Fastrac 1000 Series manual transmission fluid capacity is 38 liters. Service intervals include checking at 10 hours and changing at 1000 hours or 12 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The JCB Fastrac 1000 Series manual transmission fluid capacity is 38 liters across all four variants covered by these specifications, namely the 1115, 1115S, 1125, and 1135 built between 1994-1998.
- A 38-liter fill volume reflects a combined service fill rather than a single isolated gearbox, which aligns with the noted scope of each row covering the manual transmission, range gearbox, and PTO gearbox as a shared fluid system.
- The fluid level check interval is set at every 10 operating hours under normal use conditions, indicating a relatively frequent monitoring requirement given the large shared fluid volume across multiple gear assemblies.
- The drain and refill interval is specified at 1000 hours or 12 months under normal use conditions, whichever comes first, meaning calendar time can trigger a fluid change even when the hourly threshold has not been reached.
- All four Fastrac variants in the 1994-1998 production range share identical capacity and interval figures, with no differentiation in fluid service requirements between the base 1115, the 1115S, the 1125, or the 1135 configurations.