JCB Fastrac 1000 Series

Brake fluid capacity & service interval

JCB Fastrac 1000 Series uses brake fluid with a capacity of 0,75 liter. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 1115 (1994-1998)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 1115 (1994-1998)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 1115S (1994-1998)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 1115S (1994-1998)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 1125 (1994-1998)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 1125 (1994-1998)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 1135 (1994-1998)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 1135 (1994-1998)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The JCB Fastrac 1000 Series covers four variants across the 1994-1998 production span: the 1115, 1115S, 1125, and 1135, all sharing identical brake fluid specifications for both front and rear hydraulic brake systems.
  • Each hydraulic brake system, front and rear, carries a capacity of 0.75 liter, which is consistent with a service fill volume rather than a full overhaul or system-bleed quantity.
  • The front and rear hydraulic brake systems are treated as separate circuits in the specifications, each assigned its own 0.75-liter capacity figure, meaning the total brake fluid volume across both circuits amounts to 1.5 liters per machine.
  • A check interval of 10 hours applies to both the front and rear hydraulic brake systems across all four variants, reflecting the high-frequency inspection demands typical of agricultural machinery operating in variable field conditions.
  • The fluid change interval is defined by a dual condition: 2000 operating hours or 24 months, whichever comes first. In agricultural equipment, hour-based and calendar-based intervals are both specified because seasonal use patterns can mean calendar time accumulates faster than engine hours, or vice versa.
  • All eight specification rows carry a normal use condition, meaning the 2000-hour/24-month change interval and the 10-hour check interval are not adjusted for severe duty cycles in the data provided.
  • The uniformity of brake fluid specifications across the 1115, 1115S, 1125, and 1135 variants suggests a shared hydraulic brake architecture within the 1000 Series platform, with no capacity or interval differentiation tied to the individual model designations.

Other Systems