Iseki TS

Manual transmission fluid capacity & service interval

Iseki TS manual transmission fluid capacity ranges from 9 to 16 liters. Service intervals consist of a 100 hour check and a 900 hour change. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TS 1910 (1980-1992)
  • Use: Normal
  • Capacity 9 liter
  • Check 100 hours
  • Change 900 hours
  • Code: 9/3
TS 2510 (1980-1992)
  • Use: Normal
  • Capacity 16 liter
  • Check 100 hours
  • Change 900 hours
  • Code: 8/2
TS 3110, F (1980-1992)
  • Use: Normal
  • Capacity 16 liter
  • Check 100 hours
  • Change 900 hours
  • Code: 8/2
TS 3510, F (1980-1992)
  • Use: Normal
  • Capacity 16 liter
  • Check 100 hours
  • Change 900 hours
  • Code: 8/2

Additional Notes

  • The Iseki TS 1910 transaxle holds 9 liters of manual transmission fluid, which is notably smaller than the 16-liter capacity shared by the TS 2510, TS 3110, TS 3110 F, TS 3510, and TS 3510 F models across the 1980-1992 production span.
  • A 16-liter transaxle fill is a substantial volume, consistent with larger integrated transmission and axle housings found in compact utility tractors, where the shared fluid sump serves both the gearbox and rear axle assembly.
  • All four model variants specify a fluid level check interval of every 100 hours under normal use conditions, reflecting a routine monitoring schedule typical for working tractor applications.
  • The fluid change interval across all listed TS series models is set at 900 hours under normal use conditions, representing an extended drain period suited to the operational demands of agricultural equipment.
  • The TS 3110 and TS 3510 each appear in standard and F variants, yet both share identical 16-liter capacity and the same 100-hour check and 900-hour change intervals, indicating no specification difference between those sub-variants for the transaxle fluid system.

Other Systems