Iseki TS
Coolant capacity & service interval
Iseki TS models require coolant with a capacity range of 6 to 7,9 liters. Service intervals require a change every 12 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| TS 1910 (1980-1992) |
|
| TS 2510 (1980-1992) |
|
| TS 3110, F (1980-1992) |
|
| TS 3510, F (1980-1992) |
|
Additional Notes
- The Iseki TS 1910 carries the smallest cooling system capacity across the TS lineup at 6 liters, which reflects the lower thermal output of a smaller displacement engine requiring less coolant volume to maintain operating temperature.
- The TS 2510 cooling system holds 6.9 liters, placing it between the entry-level and mid-range configurations in terms of coolant volume.
- Both the TS 3110 and TS 3510, including their F variants, share an identical cooling system capacity of 7.9 liters, indicating a common engine bay or cooling circuit architecture across those two models despite their different designations.
- Capacity steps from 6 liters on the TS 1910 to 6.9 liters on the TS 2510 and then to 7.9 liters on the TS 3110 and TS 3510 show a clear progression in cooling system size as engine output increases across the range.
- All four configurations share a 12-month coolant change interval under normal use conditions, meaning annual replacement is the standard service cycle regardless of which model is being serviced.
- The F variants of the TS 3110 and TS 3510 carry the same 7.9-liter capacity and 12-month interval as their non-F counterparts, suggesting the F designation does not alter the cooling system specification.
- A 12-month interval tied to normal use conditions means the service schedule is calendar-based rather than mileage- or hour-based, which is a common approach for agricultural equipment that may sit idle for extended seasonal periods.